Note:The flight controller doesn't support INAV firmware.
The flight control adopts the most common F4V3 series flight control F4V3S PLUS on the market. All interfaces and solder joints have been re-formulated to optimize the layout, making it easier to install and connect the wire.
Features:
1.ESC board filter capacitor to suppress reverse electromotive force, stabilize battery voltage, and protect precision components of flight control ESC;
2.The onboard filter of the flight controller reduces the ripple of the OSD output image, and the picture is pure and clear;
3.F4V3S PLUS has both 5V and 9V BEC outputs onboard, supports DJI Sky Terminal power supply, and supports stable power supply for external devices such as receivers, video transmission cameras, etc.;
4.The four-in-one ESC uses a cost-effective MOS tube, which has good current resistance, long durability and good stability.
5.The high-performance processor supports up to the DSHOT600 protocol, the throttle is smooth and smooth, and the explosive force is strong.
6.The onboard ammeter module supports the flight controller to return current working data.
Specification:
Size: 41.0*39 .5*5mm
Pitch: 30.5*30.5/medium 4mm (3mm aperture after installing the damping ball)
Weight: 13g
Continuous current: 60A
Maximum current: 70A (5 seconds)
Input voltage: LiPo3- 6S
Processor: EFM8BB21F16G
Firmware: BLSJ H_ 30_ REV16_ 7
Drive signal support: DShot300 600/Multishot/Oneshot/PWM
Current sensor: support
BEC:9V&5V/3A
F405:MPU6500
Suppport DJI Air Unit
Package Includes:
1x LANRC F4V3S PLUS Flight Stack with 60A 4in1 ESC
