Nazgul5 V2 Analog is a 5" size BNF (Bind-and-Fly) quadcopter with Caddx Ratel, 2.1mm lens camera on it.
We sticked the lighter Caddx Ratel on one of our new updated XL5 V5 FPV frames.
Pre-tuned and setup, everything you need is just bind-and-fly!
Loads of power and smooth flights guaranteed using our popular XING motors with long-lasting NSK bearings.
Tips:
VTX is set to 25mW by default! Power levels above 25mW require a HAM license or have to be approved by local authorities! Please ensure you're flying legal frequencies and use our prepared Betaflight VTX tables according to your region.
Features:
5mm arm design for more durability
Easy-Swap arms
LED illuminated Logo
XING 2207 motors with LED Light
5" version also fits 5.1" style propellers
Popular True-X configuration
TPU crash-guards
Fits both 30.5x and 20x stacks
Specification:
SucceX-E F7 45A flight stack
XING 2207 with LED Light FPV Motor （6S 1800KV / 4S 2750KV)
Wheelbase: 240mm*240mm
Body size: 170*170mm
Propeller size: 5 inch /5.1 inch
FC pattern: 30.5*30.5/20*20 mm
FPV cam spacing: 19mm
Weight: 399g (without battery)
FC // SucceX-E F7 Flight controller
MCU: STM32F22RET6 216 MHz
Gyro: MPU6000
Baro: BMP280(I2C）
OSD: IFLIGHT OSD （AT7456E）
BEC: 5V 2.5A
BlackBox: 8MB
Uart: 4*UART(UART1、UART2、UART4、UART5)
UART1 for VTX HD/Analog Telemetry
UART2 for Receiver
UART4 for GPS
UART5 for ESC Telemetry
4×Dshot/PWM outputs
Smartaudio & IRC Tramp VTX protocol supported
WS2812 led Strip: Yes
Bepper: Yes
Firmware: IFLIGHT_SUCCEX_E_F7 4.2.0
Outer Size: 36*36mm / 30.5*30.5/φ4 mounting
Weight: 6.9g
ESC // SucceX-E 45A 2-6S BLHeli_S 4-in-1 ESC
Dimension: 36*43mm
Mounting Holes: 30.5*30.5mm/Φ3mm
Weight: 15g (without wire)
Supports 2-6S Lipo input
EFM8BB21 MCU, 24Mhz Runs BLHeli_S 16.X Firmware
Current sensor: YES
BEC: NO
Constant: 45A / Burst: 50A
Supports: DShot150/300/600/MultiShot/OneShot etc.
Target: G-H-30 BLS 16.7
VTX// SucceX Force 5.8g 800mW VTX Adjustable
The output power is stable;
Transmit power 4 gear switch: 25mW/200mW/400mW/800mW;
Output 48 frequency points,
Frequency lock fast, the boot does not interfere with companions;
Built-in output power self-check function;
Full format video format: NTSC /PAL;
Wide input voltage range. low power consumption:
7V～36V，+12V/380mA@800mW;
Small size:36*36*3mm
Mounting holes 4-M3
Lightweight: 7.2g(excluding antenna)
Specificaiton of VTX:
Item: SucceX-Force 800mW adjustable VTX
Input voltage:5V
Output voltage/ Max current: 5V 1A
12V input current: 40mA@PIT MODE, 95mA@25mW, 185mA@200mW，250mA@400mW, 380mA@800mW
Output 48 frequency points,
size:36*36*3mm
PIT/25mW/200mW/400mW/800mW
Battery Suggested Parts(not included):
6S 1550mAh XT60 Plug Battery
6S 1300mAh XT60 Plug Battery
Package Includes:
1x Nazgul5 V2 Analog Drone (pre-built and tested)
2 sets x Nazgul 5140 3-blades props(color may vary)
1x 20*200mm Battery Strap
1x 20*250mm Battery Strap
