After the very popular 3-inch Cinematic EVA bumper BumbleBee and Green Hornet CineWhoop series release, iFlight continue to strive to increase performance by coming up with their master Protek series. The Protek CineWhoop has a longer flight experience and weighs less than the previous cinewhoops!
iFlight was able to increase the speed and thrust by 50% compared to its 3-inch predecessor which gives a lot more room for a lot more fun; as a result, the ProTek35 is equipped with the Butter Smooth 2203.5 3600KV Motors. It also features the RaceCam R1 FPV Camera, Beast F7 AIO, 55A 2-6S ESC, 5.8GHz SucceX Mini 600mW VTX, Nazgul 3535 propellers, and more!
Changelog:
February 2021: Upgraded Prop Guards for more durability (Prop Guards V2.0, Material optimized)
April 2021: Upgraded Beast F7 45A V1.0 to V1.1 (Circuit design optimized, Updated to DPS310 Barometer)
June 2021: RunCam Nano2 2.1MM NTSC 4:3 changed to RaceCam R1 Micro 1200TVL 1.8mm 14*14
August 2021: RaceCam R1 Micro 1200TVL 1.8mm 14*14 changed to RaceCam R1 Mini 1200TVL 2.1mm 19*19
September 2021: Upgraded Beast F7 45A to Beast F7 55A V2
Features
Prop Guard V2.0
No Props or frame in view!
High-performance True-AIO Board Beast Whoop F7 AIO 55A to save weight and space
T700 Quality Carbon (40% more tensile strength compared to common 3K carbon)
Lightweight one-piece frame design (Less flexibility, more Rigid, more Durable)
Low Resonance frame construction (Less Jello, more Cinematic footage)
RaceCam R1 Mini FPV Camera 19*19
Butter smooth 2203.5 3600KV (4S)
Pre-tuned with smooth freestyle settings
Specifications
Board: Beast Whoop F7 AIO 55A
Motor: XING 2203.5 3600KV (4S)
Wheelbase: 151mm
Body Size: 118*94.5mmmm
Bottom plate thickness: 3.5mm
Top plate thickness: 2mm
Top and bottom plate spacing: 20mm (aluminum standoff height)
Propeller size: 3.5 inch
FC pattern: 25.5*25.5mm / 20*20mmmm
FPV cam spacing: 20mm
Weight: 305g (without battery)
Pre-Tuned & Pre- Setup
Don't worry about tuning, iFlight did that for you already! A basic PID- and Filter tuning was applied for a great flight experience!
To restore lost tunes or updates, please check out this linked article: "Firmware/Factory Dumps"
Angle-Mode (self-balancing level mode) is enabled by default to make sure your first flight doesn't end in a mess!
Please check out this linked article on "How to disable Angle-Mode, activate Acro-Mode"
FC // Beast F7 AIO
MCU: BGA-STM32F745
Gyro: BMI270
Blackbox: 8Mb Onboard Flash
BEC output: 5V 2.5A
Barometer: BMP280
Connector: Micro-USB
OSD: AT7456E
FC Firmware：IFLIGHT_F745_AIO_V2
Mounting pattern: 25.5*25.5mm φ3mm
Dimensions: 32.5*32.5mm
Weight: 8.5g
ESC // 55A 2-6S
Uarts: 5
Current Sensor: Yes
Input: 2-6S LIPO
Current scale: 100
Constant: 55A / Burst: 60A
BLHeli: BLHeli-S
Telemetry: no
ESC Firmware: BlheliS G-H-30
Mounting pattern: 25.5*25.5mm/Φ3mm
Dimensions: 32.5*32.5mm
VTX // SucceX Mini Force 5.8GHz 600mW VTX Adjustable
Power: PIT/25/200/400mW/600mW
Antenna interface: MMCX
VTX protocol : IRC Tramp
Output 40 channels.
Size: 29*29mm
Mounting pattern: 20*20Φ3/25*25 mmΦ2
Weight: 4g
Recommended Parts (Not Included)
4S 100C 1300mAh Lipo
Package Includes
Pre-built and tested Quadcopter
1 x ProTek35 Frame
1 x RaceCam R1 Mini FPV Camera 19x19mm
2 x TPU camera side plate soft mount
2 x Nazgul 3535 propeller (Set of 4 - Color May Vary)
1 x iFlight Lipo Strap 15*150mm (Color May Vary)
1 x iFlight Lipo Strap 15*250mm (Color May Vary)
1 x GoPro TPU bottom stand black (GoPro Protector not included)
