Introducing the iFlight Chimera7 7" 6S LR HD Freestyle Quadcopter! This 7" long-range can fly places never seen before, and can carry bigger batteries to give you a longer flight time! The Chimera7 comes with the Caddx Ratel 2.1mm Camera lens, and is mounted into a super-stiff frame for minimum resonance, and includes 2806.5 motors for maximum 7" prop control. You can fly big batteries (top-mounted) or even bigger batteries (bottom-mounted), 6 cells recommended, or 5 cells for slow cruising, but whatever style you fly - a Lipo or Lion pack will just do the job.
This freestyle quadcopter comes with GPS functionality to help you find your way back when flying, and also Betaflight GPS Rescue mode (default OFF to prevent unexpected behavior. Setup instructions included).
Tips:
VTX is set to 25mW by default! Power levels above 25mW require a HAM license or have to be approved by local authorities! Please ensure you're flying legal frequencies and use our prepared Betaflight VTX tables according to your region.
Features
6mm rigid arm design for more stiffness
Top- and bottom battery mount option
XING 2806.5 efficient wide stator motors
GPS pre-installed for more safety at a distance
GoPro TPU bottom stand (GoPro protector not included)
360° TPU protection, DJI cam protection, and antenna mounts
Battery voltage LED status light (illuminated IF logo on the bottom)
Specifications
Frame
Wheelbase: 320mm
Main body dimension: 285*199mm
Bottom to top distance: 20mm
Arm thickness: 6mm
Bottom plate thickness: 3mm
Top plate thickness: 2mm
Upper(middle) plate thickness: 3mm
Camera plate thickness: 3mm (included TPU inserts)
SucceX-D F7 V2.1 Stack (50A 4-in-1 ESC)
SucceX-D F7 V2.1 TwinG
MCU: 216MHz STM32F722
Gyro：2x ICM20689
Baro: YES
Blackbox：32MB
Betaflight OSD: YES
BEC: 5V 2.5A / 9V 2.5A
Current sensor scale: 100
Inverter for SBUS input (UART2-RX)
Smart audio & Tramp VTX protocol supported
Beeper pad: Yes
RSSI input pad: No
UARTs：5
Motor outputs: 8
8 pin 4in1 ESC port (GND, VBAT, M1, M2, M3, M4, CUR, R5)
6 pin DJI Air Unit port (R1, GND, R2, T2, GND, 9V)
BLHeli32 Telemetry：RX5
Input voltage：recommended 2-6S, MAX 8S
Firmware Target: IFLIGHT_F722_TWING
Mounting pattern: 30.5*30.5mm φ4mm with Grommets φ3mm
Dimensions: 36*36mm
Weight: 7.5g
USB Type-C
SucceX 50A ESC
MCU: STM32F051
Up to 48kHz PWM frequency
Capacitance: 470uF/50V
Current Sensor: Yes
Input: 2-6S LIPO
Constant: 50A / Burst: 60A
BlHeli32 telemetry: Yes
BEC: No
Supports up to Dshot1200, Proshot, Oneshot, Multishot
Target: iFlight-BL32-4IN1
Weight: 14.4g
Mounting pattern: 30.5*30.5mm/Φ3mm
Dimensions: 43*39mm (including the power pads)
SucceX Force 5.8GHz 800mW VTX Adjustable
SucceX-Force 800mW adjustable VTX
Input voltage: 7-36V
Output voltage/ Max current: 5V 1A
12V input current: 40mA@PIT MODE, 95mA@25mW, 185mA@100mW，250mA@400mW, 380mA@800mW
Channel: 40
Size:36*36*3mm
PIT/25mW/100mW/400mW/800mW
Additional Suggested Parts (Not Included)
Adjustable GoPro mount (0-40)
1300KV Cruiser suggested battery: 6S 4000mAh
1800KV Speed Cruiser suggested battery: 6S 2600mAh
Pre-Tuned & Pre-Setup
Don't worry about tuning, iFlight did that for you already! A basic PID- and Filter tuning was applied for a great flight experience!
To restore lost tunes or updates, please check iFlight's linked article on "Firmware/Factory Dumps"
Angle-Mode (self-balancing level mode) is enabled by default to make sure your first flight doesn't end in a mess!
GPS Rescue is OFF by default to prevent from unwanted or unexpected drone behavior.
Please check iFlight's linked article on "GPS Rescue Mode // Setup"
Package Includes
1 x Chimera7 frame
1 x GoPro TPU bottom stand incl. lock screw
1 x Caddx Ratel, 2.1mm lens camera
2 x Albatross LHCP RP-SMA 5.8g 150mm antenna
2 x Gemfan tri-blade 7040 props (Set of 4 - Color may vary)
4 x 20*250mm Microfiber PU Leather Battery Strap (Color May Vary)
