Mobula7 V2 75mm 2S Indoor Micro Brushless Whoop FPV Racer
Sale Free shipping

Mobula7 V2 75mm 2S Indoor Micro Brushless Whoop FPV Racer

  • Model: CA0207-210
  • Shipping Weight: 0.4kg
  • Units in Stock: 19

Price:   $109.00  $69.9936% off

Please Choose:

  • DSM RX
  • Frsky Non-EU
  • Frsky RX

Order this & earn 35 reward points

  • Details
  • Reviews
  • FAQ

The mobula7 now comes with the upgrade frame, lighter in weight and more resistant to crash.



Brand Name: Happymodel
Mode Name: Mobula7
Item Name: 2S 75mm Brushless Whoop racer drone BNF
Wheelbase: 75mm
Size: 98mm*98mm*36mm
Weight: 25.9g(without battery)
Weight:40g(with Original 250mah lipo battery x2 )



New Crazybee F3 PRO Flight controller 1-2s Lipo compatible
2S whoop more powerful and more flight time
Betaflight support , multi flight mode: ACRO/AIR/ANGLE
New 0802 Powerful and High efficiency Brushless motor and Smooth ESC
Betaflight OSD support ,easy to get RSSI, Voltage ,current from your goggles(DSMX version no RSSI output)
Smartaudio ready , change VTX bands, channels via OSD (
Adjust the settings and the PID of the flight controller via OSD
Frsky Non-EU version support NON-EU Frsky transmitter D8/D16 compatible
Flysky version support both AFHDS and AFHDS-2A protocol transmitter
DSM2/DSMX version support DSM2 and DSMX compatible Spektrum transmitter
Frsky EU-LBT version support Frsky EU-LBT firmware transmitter
Full telemetry function ready
Head lights ready
Camera angle adjustable
Real Bind and Fly version
Buzzer Ready


Package includes:

Mobula7 75mm frame x 1
Crazybee F3 Pro FC with built-in receiver x 1
SE0802 16000KV motor x 4
40mm propeller (4CW+4CCW) X 1
Aio camera with VTX x 1
Buzzer x 1
USB lipo charger x 1
Propeller disassemble tool x 1
Screwdriver x 1


Note: DSM2/DSMX and Frsky EU-LBT version are Serial-based receiver, so Smartaudio is not compatible.   No battery in it, please buy it seperately. 


Flight Controller


(Frsky version) CRAZYBEEF3 PRO FR Firmware target: CrazybeeF3FR
(Flysky version) CRAZYBEEF3 PRO FS Firmware target: CrazybeeF3FS
(DSM2/DSMX version) CRAZYBEEF3 PRO Firmware target: CrazybeeF3DX
(Frsky EU-LBT version) CRAZYBEEF3 PRO FS Firmware target: CrazybeeF3FS

Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready
Built-in Receiver ( Diffirent version having diffirent receiver)
Built-in Betaflight OSD(SPI Control)
Built-in Current meter Max 28A
Current meter scale set to 1175
Built-in 5V 1A BEC with LC filter
Built-in voltage detection
BLHELI_S pass-through Ready
Heading LED Ready


Brushless Motor


Item Model: SE0802
KV: 16000KV
Configuration: 9N12P
Stator Diamter: 8mm
Stator Length: 2mm
Shaft Diameter: 1.0mm
Motor Dimension (Dia.*Len) : Φ10.5*14.5mm
Weight: 1.8g
No. of Cell: 1-2S Lipo




Item Name: 4in1 5A ESC
Con. Current: 5A
Max. Current: 6A (3s.)
Support BLHeliSuite programmable
Factory firmware: S_H_50_REV16_7
Default protocol: DSHOT600
Power supply: 1-2S LiPo/LiPo HV (3.5v/8.7v)


5.8G VTX & AIO Camera


5.8G 40CH 25mW VTX
Output power: 25mw
Frequency: 40CH
Input voltage: 3.3V-5.5V
Current consumption: 300mA(type)

FOV120 FPV Camera
Camera resolution: 700TVL
Field of view: 120°
Video Format: NTSC
Antenna: RG178 antenna
Frequency: 5.8GHz 5bands 40 channels
With Raceband
Smartaudio ready(Frsky EU-LBT and DSMX version not compatible)
Size: 13.9"12.0mm
Weight: 3g


Lipo Battery


Continuous Discharge Rate: 30C
Instantaneous discharge rate: 60C
Size: 55x12x7mm
Weight: 6.5g
Connector: PH2.0
Note: Need 2pcs batteries for Series circuit


Frsky NON-EU RX Version



SPI BUS receiver
Frsky D8/D16 switchable
Compatible Non EU transmitter both D8 and D16 mode
Channels: 8ch or 16ch
Failsafe support
No ground interference ( Transmitter and receiver 1 m from the ground): 300m


Flysky Receiver Version



SPI BUS receiver
Protocol: AFHDS and AFHDS-2A Switchable
Channels: 8ch(AFHDS) or 14ch(AFHDS-2A)
Failsafe support
No ground interference ( Transmitter and receiver 1 m from the ground): 300m


DSM2 /DSMX RX Version



Serial bus receiver
Protocol: DSM2/DSMX compatible
Channels:6-9 (Depend on your radio)
No ground interference ( Transmitter and receiver 1 m from the ground): 300m


Frsky EU-LBT Version
(External XM+ RX)


Support Frsky EU-LBT firmware transmitter
Operating Voltage Range: 3.7~10V
Operating Current: 30mA @5V
Operating Range: Full range
With RSSI output on board: Analog 0~3.3V
Firmware Upgradeable, Default firmware EU-LBT with RSSI



happymodel mobula 7


mobula 7 v2


mobula 7


happymodel mobula 7


mobula 7


happymodel mobula 7

Similar Products
Who's Online
There currently are 41 guests and 
2 members online.