ARRIS X220 FPV Racing Drone BNF

ARRIS X220 FPV Racing Drone BNF

  • Model: CA0126
  • Shipping Weight: 1kg
  • Units in Stock: 46
  • Manufactured by: ARRIS

Price:   $169.00

Order this & earn 169 reward points


  • Details
  • Reviews
  • FAQ

ARRIS X220 220mm FPV racig drone ARF comes with ARRIS X2205 2300kv high quality brushless motor,Flycolor Raptor S-Tower BHeli-S 2-4S 4-in-1 30A ESC + F3 + PDB + OSD board,5042 high efficiency propeller,5823S 5.8G 300mW 40CH mini video TX. It is assembled and tested before leaving the factory. When you receive it, you need to install your own receiver on it and do some settings in Betaflight, then you can fly.


The main feature of the ARRIS X220 is the "X" symmetrical design,light weight,simple structure,durable and agile.

 

 

Specifications: 

Diagonal Wheelbase: 220mm
Flight Controller: F3 flight Controller
Frame Material: Pure Carbon Fiber
BNF weight: 329.5g
Camera: ARRIS XAT700M FPV camera
FPV TX: 5.8G 200mw 40CH
Antenna: 5.8G Antenna
Flying Time: about 12 minutes hovering

 

 

The ARRIS X220 comes with the chamfered edge design on the arm, which gives the quad a sleek look.It comes with 4mm pure carbon fiber plate arm, make the frame super strong.The ARRIS X220 is made of pure carbon fiber with alloy pats, the weight is quite light.The structure of the X220 is simple, it is easy to maintain.

 

 

Flycolor Raptor S-Tower comes wih BLHei-S 4-in-1 ESC and F3,PDB and OSD. The ESC comes with EFM8BB21F16G MCU, support Dshot / Multishot / Oneshot,support high KV motor, can support at most 500k eRPM.Dshot is digital signal, anti-interference ability is stronger, and do not need throttle calibration.


The default firmware of the F3 is betaflight,it supports PPM, PWM and SBUS remote control / receiving mode. Built-in current meter, OSD directly display the real-time current without any additional connection.
With the tower on the ARRIS X220, the wires are tidy and concise. And it is more convenient to maintain in the future.

 

 

ARRIS X2205 V2 2300KV brsushless motor is high end brushless motor specially designed for high performance fpv racing drones.It adopts brand new M5 steel shaft, improving the structure strength. It had been upgraded to centrifugal fan design, optimizing the heat dissipation.It also adopts original Japan NSK bearing and N52 tile-shape magnets to ensure the power and quality of the motor.

 

 

ARRIS 5042 propeller--It has bigger windward area, well balance and strengthen root, and the efficiency is 10% higher than normal propeller.

 

 

ARRIS XAT700M HS1177 fpv mini camera is specially designed for FPV. It perfoms well in both bright and dark condition with 700TVL high quality image.The angle of the camera is adjustable on the ARRIS X220.

 

 

ARRIS 5.8g 200mW 40-CH video TX pre-assembled.The The ARRIS TS5823L transmitter packs 200mW of ultra clean 5.8GHz power in a micro sized video/audio transmitter with LED display! The ARRIS TS5823L is transmitting a full range of 40 channels and only weighs 6.5g.

 

 

ARRIS X220 has integrated with a remote controller battery warning buzzer, pilot can set the threshold (adjustable)according to CF parameter-adjustment software. In addition, you can also locate your racing drone through triggering the buzzer with the switch D on the transmitter.

 

 

Package Include:

1 x ARRIS X220 FPV Racing Quad Frame
4 x ARRIS X2205 2300KV V2 Brushless Motors (2CW+2CCW)
1 x Flycolor Raptor S-Tower BHeli-S 2-4S 4-in-1 30A ESC + F3 + PDB + OSD
4 x ARRIS 5042 3-blade Propeller
1 x ARRIS XAT700M FPV mini camera
1 x 5.8G 200mw 40CH FPV TX
1 x FPV Transmitter Antenna
1 x ARRIS Buzzer
2 x Battery straps

 

Note: Remote Controller,Battery and Battery Charger are sold separately.

Similar Products
无标题文档
Who's Online
There currently are 17 guests online.